If dust and small pieces of debris accumulate in a baseboard heating unit, rooms in a home may not heat up as quickly, and utility bills may increase. The following steps describe how to clean a unit’s interior and keep it maintained.
Materials
* tarps
* vacuum cleaner (with hose attachment)
* wire brush
* fin tool
* sponge
* mild detergent
* bucket of warm water
* white vinegar
* hand-held scrub brush
* lint-free towels
Vacuuming And Removing Stains
Tarps can be laid across the flooring adjacent to a heating unit to prevent dirt or a cleaning agent from coming into contact with a floor. A unit’s power needs to be turned off, and its cover should be removed. A vacuum cleaner’s hose attachment should be moved over the metal fins that run across the unit’s interior to collect loose pieces of debris. If dirt is trapped between metal pieces, a wire brush can be used to loosen residue.
If any metal pieces are bent, a fin tool can be pressed against them to realign them with surrounding pieces. A sponge that has been dipped into a bucket of soapy water can be used to remove stains from internal components. Surfaces should be dried with a lint-free towel.
Eliminating Stubborn Stains
A small amount of white vinegar can be added to a cleaning solution to strengthen it if staining inside of a unit is severe. A hand-held scrub brush can be moved swiftly back and forth over dirty areas to eliminate substances. A dampened sponge should be wiped across surfaces to eliminate a cleaning agent or any remaining dirt. Lint-free towels can be used to dry clean surfaces. If a unit’s cover has dust in crevices, a vacuum cleaner and hose can be used to clean it.
A unit’s cover needs to be replaced before a heating unit is turned on. If warm air is emitted through vents in an even manner, a unit’s interior was cleaned properly. A company that provides an HVAC Service in Urbana can assist with repairs, installations and maintenance steps. Individuals can learn About us by visiting a website of a business providing HVAC Service in Urbana.