logo

Stop That Water Leak in Tacoma Before It Gets Out of Control

logo
Stop That Water Leak in Tacoma Before It Gets Out of Control

The water line for a home or business starts at the municipal connection and consists of every piece of piping in the building that carries potable water. Once the pipe enters the building, it will branch off to supply the water heater. This is the start of the hot water line. Next, the hot and cold pipes are run to each room in the building that requires a tap. In some instances, this can be a lot of pipes and they often run through the walls of rooms that have no need for water. This means that a Water Leak in Tacoma can occur almost anywhere in the building.

Leaking pipes are not always easy to locate. Visible leaks like those under sinks can be easy to deal with, but those hidden leaks present some interesting challenges. Expert plumbers can discover hidden leaks using various methods. For example, high-frequency sonic detectors can be used to listen for the unique sounds that leaking water makes. Since these sounds can vary, the contractor will need to check for a variety of noises. The loudest of them usually sounds like an open tap because the break in the line is so big that water is escaping very quickly.

The slight dripping noise from a small leak are often the hardest to locate because the Water Leak in Tacoma may be very slow. In this case, the plumber might need to add a little pressure in the system. This is done by inserting an inert gas into the pipes. If the leak is under a slab, it can be much harder to find. Using these leak detection tools can help pinpoint the problem and this can reduce the need for extensive cutting to the concrete foundation. Keep in mind that if the building has multiple leaks, the plumber may need to replace all the piping. This is mostly a concern on older buildings.

If everything in the building is okay, then it is time to check the main line. This area can be much more difficult to test because so much of it is buried. One thing that the contractor can look for is mud. Putting pressure in the piping can force the water through the crack, which should soften the soil around the damaged area. As a last resort, the use of ground penetrating radar can check for voids around the pipe.

Be the first to like.

Share!
    FavoriteLoadingAdd to favorites


    Follow Us:
    logo
    logo
    Copyright urlscribe © 2013 - 2018. All Rights Reserved.
    Shares